Repairs inside the home

Tile Repairs, Regrouting & Tiling in Perth

Tiling enquiries can cover new wall or floor finishes, replacement of damaged tiles, regrouting and preparation of suitable substrates.

What needs attention?

Choose the closest match to see the repair considerations and details.

What we check on site

Grout, silicone and the cause of a shower leak

For black silicone around a shower base or grout falling out between tiles, mention previous repairs and water appearing outside the shower. A recurring leak should be described as a leak, not only as a request for new silicone.

Different joint materials

Grout fills the joints between tiles; silicone provides a flexible seal at suitable junctions or movement joints. The materials have different roles and are not interchangeable in every location. We check the joint and cause of deterioration before specifying replacement.

Surface resealing and membrane work

Resealing renews visible flexible joints. Waterproofing repair addresses the membrane and junctions beneath or behind finishes and can require tile removal and substrate repair. Renewing surface silicone does not establish that the underlying waterproofing is sound.

Damaged tiles and underlying problems

A chipped kitchen floor tile differs from a loose tile behind a sink. Describe impact, water entry, hollow areas and repeat cracking. Do not prise off a loose tile to prove the fault before an assessment.

A hollow sound is a clue

A hollow-sounding tile may have voids or areas of poor bond, but sound alone does not establish the extent or cause of failure. Movement, cracking, moisture and substrate condition need assessment alongside the surface symptom.

Cracks beneath the finish

Cracked tiles can result from impact, movement, inadequate support or moisture-related problems below the finish. Repeated cracks or several affected tiles need the cause checked before replacement. A new tile alone does not repair an unstable backing.

Loose tiles, persistent moisture or cracking may indicate substrate or waterproofing problems that need assessment before cosmetic work.

Service scope and quote details

Tiling & Tile Repairs

Shower regrouting: tile condition and leak causes

Shower regrouting renews joints between suitable tiles. We first check for loose tiles, movement, damaged edges and signs of continuing water entry. A weak substrate or repeated moisture problem needs investigation before fresh grout covers it. Tell us where grout is missing and whether the shower still leaks after earlier repairs.

The quote identifies the repair area, grout removal, soundness of retained tiles, replacement-tile availability and any substrate work. We check the existing tile and grout finish and discuss compatible materials and the appearance of the repaired area. See the existing bathroom surface repair example for tile and finish work; we inspect your shower to identify the leak source and the repairs needed.

Shower resealing: joints and silicone

Shower resealing concerns the visible flexible joints, including worn silicone at suitable junctions. The agreed process covers removal of failed sealant, cleaning and preparation of the joint, a compatible replacement and the product's return-to-use instructions. Tell us about previous sealants and recurring discolouration, gaps or leaks.

Will fresh silicone stop every shower leak?

No. Loose tiles, persistent damp or repeated failure can involve plumbing, movement or the membrane beneath the finish. Surface resealing renews visible joints; membrane faults need assessment and a separate waterproofing repair scope. Use leaking-shower assessment if the source is unclear, and read how silicone, grout and waterproofing differ before agreeing cosmetic work.

What Affects the Quote?

Tile availability, repair area, removal, substrate condition, grout choice and waterproofing requirements affect the quote.

Discuss tile repairs or installation

Discuss the job with our Perth team

Tell us your suburb, what needs attention and any access arrangements.

Tiling service guide

Tiling: Common Questions

Can just one cracked kitchen floor tile be replaced?

A localised replacement may be possible if a compatible tile is available and the surrounding surface is sound. We assess the damaged tile and substrate before confirming the scope. Repeated cracking or loose tiles may point to a larger problem underneath.

Can you renew grout that is falling out between shower tiles?

Yes, after checking the underlying condition. Loose tiles, movement and persistent moisture need assessment before renewing grout or silicone. Regrouting does not replace a failed membrane; see the difference between surface resealing and waterproofing when a shower keeps leaking.

What affects the cost of a small tiling or regrouting job?

The area, tile size, layout, matching material and preparation needed affect the quote. Access and the condition of the existing surface also matter. Tell us whether tiles are supplied and about any known moisture or movement issue.

What is the difference between grout and silicone?

Grout fills tile joints, while silicone provides a flexible seal at suitable junctions. Their roles differ. We assess the joint and moisture history before agreeing which material and preparation are appropriate.

How does shower resealing differ from waterproofing?

Resealing treats visible surface joints. Waterproofing concerns the membrane and its junctions beneath the finishes. Persistent leakage needs diagnosis; tile removal and substrate work may be necessary and are separate from a silicone replacement.

Why can tiles sound hollow?

Voids or reduced bonding can change the sound, but tapping alone does not diagnose the repair. We check visible damage, movement, moisture and the backing condition before agreeing local replacement or further investigation.

Can cracked tiles indicate an underlying problem?

Yes. Movement, support or moisture can contribute as well as impact. We check the pattern and history before choosing replacement. Recurring cracks may need substrate or waterproofing investigation rather than another surface repair.

Service details

Lay wall or floor tiles to an agreed pattern and finish
Replace localised cracked or loose tiles where a compatible match exists
Renew grout or sealant after checking the underlying condition

Site assessment and enquiry details

Area dimensions, tile size and layout preference
Photos of the substrate, damage, corners and penetrations
Whether tiles are supplied and any known waterproofing or movement issue

Tell us the area, project stage and tile finish you want. We measure and check the substrate on site, then confirm preparation, tile requirements and the quote. Existing photos and approximate measurements are optional; email safely taken images to handyman.maintenance.au@outlook.com if available.

Service pricing

Service price range

Ellis Services Group service price range

A$45-150per m² tiler charge

We provide a written quote after an on-site assessment of the property, materials, access and agreed scope of work. Contact our team to arrange your assessment.

We set out the pricing basis, fees and included work in your written quote so you can see the scope of the job.

Perth metropolitan service area

Speak with our local team

Choose your area to include it in the enquiry.

Perth CBD & Inner Suburbs North Perth & Stirling Joondalup & Northern Suburbs South Perth & Canning Fremantle & Coastal South Eastern Suburbs, Midland & Swan Cockburn, Rockingham & Southern Corridor Western Suburbs & Swanbourne Perth Hills, Mundaring & Kalamunda

Guides & repair examples

Talk directly with our Perth team

Enquire about this service

Tell us what needs fixing, where the property is and any access details. We will discuss the job directly with you.